Q1: How do I register my Quantum V3 Cooler system?
A: Activate your warranty by registering within 30 days of purchase. Scan the QR code in the guide or visit this link.
Q2: What are the specifications of the Quantum V3 Cooler?
A: The cooler has a max current of 30A/15A, working voltage of 12V/24V, and a rated cooling capacity of 300 watts. It uses a micro brushless inverter compressor and an axial flow fan, both rated at 24V.
Q3: What items are included with the Quantum V3 Cooler?
A: The package includes 1 Quantum V3 Cooler, 1 Wiring loom, 1 Carbon fiber baseplate, 2 Quick release pins, and 4 Rubber isolators.
Q4: How do I control the Quantum V3 Cooler?
A: The cooler can be controlled via the buttons on the system or by a wired remote (sold separately). It allows temperature adjustments in increments of 5 degrees Fahrenheit and displays the set temperature for 2 seconds before returning to the current system temperature.
Q5: How do I mount the Quantum V3 Cooler?
A: Determine the best location, ensuring it's away from heat sources and has sufficient air gap at the back. Mark and drill holes, install rivnuts, attach the base plate with rubber isolators, and secure the system with 2 ball pin connectors.
Q6: How do I manage ducting and plenums?
A: Consider using ChillOut Systems 4-inch ducting and plenums for optimal airflow. If using 3-inch ducting, pair the system with an in-line 3-inch blower rated to 275 cfm. Place the NACA Duct, trace an outline, cut it out, and secure it using M4 nuts and bolts.
Q7: How do I install the wiring?
A: Connect the wiring harness to the system and run it to your electrical source, either directly to the battery with an inline fuse or to a 40amp relay if using a switch. Trim excess wire and connect accordingly.
Q8: What additional items are frequently paired with the Quantum V3 Cooler?
A: Items often paired with the cooler include the Coolant Formula (1.5L), 4" Carbon Fiber 90º Air Plenum, Pro Touring Cooling Shirt, Remote Control (V3/PRO), Rapid Release Kit, 10ft Insulated Coolant Hose, and more.
Q9: How do I connect the shirt to the Quantum V3 Cooler?
A: Run the insulated hose from the system to the driver's seat, ensuring enough slack to reach the driver's shirt comfortably. You can use a dual prong connector or Chillout Systems Rapid Release Kit, depending on your setup.
Feel free to ask if you have more specific questions or need further assistance!