Q1: How do I register my Aircon Helmet Cooler system?
A: Activate your warranty by registering within 30 days of purchase. Scan the QR code in the guide or visit this link.
Q2: What are the specifications of the Aircon Helmet Cooler?
A: The cooler has a max current of 30A/15A, working voltage of 12V/24V, and a rated cooling capacity of 500 watts. It uses a micro brushless inverter compressor and an axial flow fan, both rated at 24V.
Q3: What items are included with the Aircon Helmet Cooler?
A: The package includes 1 Aircon Helmet Cooler, 1 Wiring loom, 1 Carbon fiber baseplate, 2 Quick release pins, and 4 Rubber isolators.
Q4: How do I control the Aircon Helmet Cooler?
A: The cooler can be controlled via the buttons on the system or by a wired remote (sold separately). It has three air volume settings (low, medium, and high) and allows temperature adjustments in increments of 5 degrees Fahrenheit.
Q5: How do I mount the Aircon Helmet Cooler?
A: Determine the best location, ensuring it's away from heat sources and has sufficient air gap at the back. Mark and drill holes, install rivnuts, attach the base plate with rubber isolators, and secure the system with 2 ball pin connectors.
Q6: How do I manage ducting and plenums?
A: Consider using ChillOut Systems 4-inch ducting and plenums for optimal airflow. If using 3-inch ducting, pair the system with an in-line 3-inch blower rated to 275 cfm. Place the NACA Duct, trace an outline, cut it out, and secure it using M4 nuts and bolts.
Q7: How do I install the wiring?
A: Connect the wiring harness to the system and run it to your electrical source, either directly to the battery with an inline fuse or to a 40amp relay if using a switch. Trim excess wire and connect accordingly.
Q8: What additional items are frequently paired with the Aircon Helmet Cooler?
A: Items often paired with the cooler include the Maglock® Air 1.25” Hose, 4" Carbon Fiber 90º Air Plenum, 4" Neoprene Air Duct Hose, Maglock® Air Helmet Side, Remote Control (AirCon), and more.
Q9: Can I control the Aircon Helmet Cooler with a remote?
A: Yes, the Aircon Helmet Cooler can be controlled with a wired remote, which is sold separately. It is recommended to place the remote somewhere that sun won’t directly glare onto it to ensure readability while driving.
Feel free to ask if you have more specific questions or need further assistance!